| Part | Nm | ft. lbs. |
| Vapor canister to vehicle bolts | 6 Nm | 4 ft. lbs. |
Engine Block
| Part | Nm | ft. lbs. | in. lbs. | Notes |
| Connecting Rod Cap Bolts | 20 Nm + 90° Turn | 15 ft. lbs. + 90° Turn | - | Replace fastener with new one. |
| Crankshaft Inner Main Bearing Cap M11 Bolts | 20 Nm + 90° Turn | 15 ft. lbs. + 90° Turn | - | |
| Crankshaft Outer Main Bearing Cap and Windage Tray M8 Bolts | 21 Nm + 90° Turn | 15 ft. lbs. + 90° Turn | - | |
| Crankshaft Position (CKP) Sensor To Engine Block M6 Bolt | 12 Nm | 9 ft. lbs. | - | |
| Crankshaft Side Main Bearing Cap (Tie Bolt) M8 Bolts | 30 Nm | 22 ft. lbs. | - | |
| Crankshaft Target Wheel To Counterweight Bolts | 11 Nm | 8 ft. lbs. | - | Replace fastener with new one. |
| Engine Block Ground Strap Bolt | 23 Nm | 17 ft. lbs. | - | |
| Engine Block Ground Strap To Frame Nut | 20 Nm | 15 ft. lbs. | - | |
| Engine Block Heater M6 Bolt | 12 Nm | 9 ft. lbs. | - | |
| Lower Oil Pan To Upper Oil Pan - Bolts | 9 Nm | - | 80 in. lbs. | |
| Lower Oil Pan To Upper Oil Pan - Nuts | 10 Nm | 7 ft. lbs. | - | |
| Oil Cooler To Oil Filter Housing Screws | 12 Nm | 9 ft. lbs. | - | |
| Oil Filter Housing Cap | 25 Nm | 18 ft. lbs. | - | |
| Oil Filter Housing/Oil Cooler To Engine Block M6 Bolts | 12 Nm | 9 ft. lbs. | - | |
| Oil Level Indicator To Cylinder Head Bolt | 18 Nm | 13 ft. lbs. | - | |
| Oil Pan Drain Plug | 27 Nm | 20 ft. lbs. | - | |
| Oil Pressure Sensor To Oil Filter Housing | 20 Nm | - | 177 in. lbs. | |
| Oil Pump Pick Up Tube Bracket To Windage Tray M6 Bolt | 12 Nm | 9 ft. lbs. | - | |
| Oil Pump Pick Up Tube To Oil Pump M6 Bolt | 12 Nm | 9 ft. lbs. | - | |
| Oil Pump Sprocket M8 Bolt | 26 Nm | 18 ft. lbs. | - | |
| Oil Pump To Engine Block M6 Bolts | 12 Nm | 9 ft. lbs. | - | |
| Piston Oil Cooler Jet To Engine Block Bolt | 6 Nm | - | 53 in. lbs. | |
| Upper Oil Pan To Engine Block M8 Bolts | 23 Nm | 17 ft. lbs. | - | |
| Upper Oil Pan To Rear Seal Retainer M6 Bolts | 10 Nm | 7 ft. lbs. | - |
Cylinder Head
| Part | Nm | ft. lbs. | in. lbs. | Notes |
| Camshaft bearing cap | 10 Nm | - | 89 in. lbs. | |
| Camshaft chain tensioner (primary) bolt | 12 Nm | 9 ft. lbs. | - | |
| Camshaft chain guide (primary) bolt | 12 Nm | 9 ft. lbs. | - | |
| Camshaft chain idler sprocket bolt | 26 Nm | 19 ft. lbs. | - | |
| Camshaft chain LH tensioner (secondary) bolt | 12 Nm | 9 ft. lbs. | - | |
| Camshaft chain LH guide (secondary) bolt | 12 Nm | 9 ft. lbs. | - | |
| Camshaft chain RH tensioner (secondary) bolt | 12 Nm | 9 ft. lbs. | - | |
| Camshaft chain RH guide (secondary) bolt | 12 Nm | 9 ft. lbs. | - | |
| Camshaft position (CMP) sensor to cylinder head bolt | 9 Nm | - | 80 in. lbs. | |
| Cylinder head coolant pipe plug | 35 Nm | 26 ft. lbs. | - | Replace fastener with new one. |
| Cylinder head oil restrictor M8 plug | 18 Nm | 13 ft. lbs. | - | |
| Cylinder head cover M6 bolts | 12 Nm | 9 ft. lbs. | - | |
| Catalytic converter to cylinder head M8 bolts | 23 Nm | 17 ft. lbs. | - | |
| Fuel rail to lower intake manifold M6 bolts | 7 Nm | - | 62 in. lbs. | |
| Heater hoses to cylinder head cover bracket | 8 Nm | - | 71 in. lbs. | |
| Intake manifold (upper) M6 bolts | 10 Nm | - | 89 in. lbs. | |
| Intake manifold (lower) M6 bolts | 9 Nm | - | 80 in. lbs. | |
| Intake manifold support bracket lower M8 bolt | 25 Nm | 18 ft. lbs. | - | |
| Intake manifold support bracket upper nuts | 10 Nm | 7 ft. lbs. | - | |
| Oil control valve/cam phaser bolt - exhaust | 150 Nm | 118 ft. lbs. | - | |
| Oil control valve/cam phaser bolt - intake | 30 Nm + 45° Turn | 22 ft. lbs. + 45° Turn | - | |
| Oil temperature sensor to cylinder head | 11 Nm | 8 ft. lbs. | - | Replace fastener with new one. |
| Spark plug to cylinder head | 18 Nm | 13 ft. lbs. | - | |
| Throttle body support bracket bolt | 10 Nm | 7 ft. lbs. | - | |
| Throttle body support bracket bolt to front cover | 10 Nm | 7 ft. lbs. | - | |
| Variable valve timing solenoid to cylinder head cover bolt | 4 Nm | - | 35 in. lbs. | |
| Variable valve lift solenoid bolt | 10 Nm | 7 ft. lbs. | - | |
| Wire harness retainer bracket to LH cylinder head bolts | 10 Nm | 7 ft. lbs. | - |
Front Engine
| Part | Nm | ft. lbs. |
| Coolant crossover housing to engine timing cover M6 bolts | 12 Nm | 9 ft. lbs. |
| Engine timing cover M6 bolts | 12 Nm | 9 ft. lbs. |
| Engine timing cover M8 bolt | 25 Nm | 18 ft. lbs. |
| Engine timing cover M10 bolts | 55 Nm | 41 ft. lbs. |
| Thermostat housing to coolant crossover M6 bolts | 12 Nm | 9 ft. lbs. |
| Vibration damper M16 bolt | 40 Nm + 105° Turn | 30 ft. lbs. + 105° Turn |
| Water pump to engine timing cover M6 bolts | 12 Nm | 9 ft. lbs. |
| Water pump to engine timing cover M8 bolt | 25 Nm | 18 ft. lbs. |
| Water pump to engine timing cover M10 bolt | 55 Nm | 41 ft. lbs. |
Rear Engine
| Part | Nm | ft. lbs. | Notes |
| Flexplate to crankshaft bolts | 94 Nm | 69 ft. lbs. | Replace fastener with new one. |
| Rear crankshaft oil seal retainer bolts | 12 Nm | 9 ft. lbs. | |
| Torque converter to flexplate bolts | 42 Nm | 31 ft. lbs. | Replace fastener with new one. |
| Trans to engine block bolts | 50 Nm | 37 ft. lbs. | |
| Trans to upper oil pan bolts | 50 Nm | 37 ft. lbs. |
Engine Mounting
| Part | Nm | ft. lbs. |
| Left Engine Mount Bracket to Engine Block Bolts | 65 Nm | 48 ft. lbs. |
| Left Engine Mount Isolator to Engine Mount Bracket Nut | 122 Nm | 90 ft. lbs. |
| Left Engine Mount Isolator to Frame Bolts | 55 Nm | 41 ft. lbs. |
| Rear Mount Isolator to Transmission Bolts | 55 Nm | 41 ft. lbs. |
| Rear Mount Isolator to Transmission Crossmember Nuts | 175 Nm | 129 ft. lbs. |
| Right Engine Mount Bracket to Engine Block Bolts | 65 Nm | 48 ft. lbs. |
| Right Engine Mount Isolator to Engine Mount Bracket Nut | 122 Nm | 90 ft. lbs. |
| Right Engine Mount Isolator to Frame Bolts | 55 Nm | 41 ft. lbs. |
Miscellaneous Components
| Part | Nm | ft. lbs. | in. lbs. |
| Air Cleaner Housing to Side Rail | 5 Nm | - | 44 in. lbs. |
| Air Cleaner Inlet Duct to Housing | 4 Nm | - | 35 in. lbs. |
| Air Cleaner Lid Bolts | 4 Nm | - | 35 in. lbs. |
| Air Cleaner Resonator to Shroud Bolts | 3 Nm | - | 27 in. lbs. |
| Air Inlet Hose Band Clamps | 3 Nm | - | 27 in. lbs. |
| Engine Cover Bracket to Cylinder Head Cover Bolts | 7 Nm | - | 62 in. lbs. |
| Engine Cover Bracket to Intake Manifold Bolts | 8 Nm | - | 71 in. lbs. |
| Engine Cover to Bracket Bolts | 5 Nm | - | 53 in. lbs. |
| Engine Lift Bracket | 21 Nm | 15 ft. lbs. | - |
| Heater Hose Assembly Support Bracket Bolts | 8 Nm | - | 71 in. lbs. |
| Heater Hose Assembly Support Bracket Nut | 8 Nm | - | 71 in. lbs. |
| Heater Hose Assembly to Bracket Nuts | 8 Nm | - | 71 in. lbs. |
ECM
| Part | Nm | ft. lbs. | in. lbs. |
| Amplifier To Body | 5 Nm | - | 44 in. lbs. |
| BCM To Body | 5 Nm | - | 44 in. lbs. |
| Central Vision Processing Module (CVPM) To Body Bolts | 5 Nm | - | 44 in. lbs. |
| DTCM Bracket Mounting Nuts | 9 Nm | - | 80 in. lbs. |
| EPB Nut | 6 Nm | - | 53 in. lbs. |
| ORC Module | 11 Nm | 8 ft. lbs. | - |
| Park Assist Module To BIW | 3 Nm | - | 26 in. lbs. |
| PCM Bracket To Body Bolts | 6 Nm | - | 53 in. lbs. |
| PCM Ground Wire Install | 7 Nm | - | 62 in. lbs. |
| PCM Ground Wire Nuts | 7 Nm | - | 62 in. lbs. |
| PCM To Bracket Bolts | 8 Nm | - | 71 in. lbs. |
| PCM To Bracket Nuts | 8 Nm | - | 71 in. lbs. |
| PDC Lower Cover Nuts | 8 Nm | - | 71 in. lbs. |
| PDC To Wiring Connector | 5 Nm | - | 44 in. lbs. |
| Power Inverter Module Bracket To IP | 8 Nm | - | 71 in. lbs. |
| RFH Module To bracket | 9 Nm | - | 80 in. lbs. |
| Security Gateway Module To Speaker Enclosure | 5 Nm | - | 44 in. lbs. |
| Steering Column Control Module Band Clamp Screw | 6 Nm | - | 53 in. lbs. |
| Tire Pressure Monitoring (TPM) Module Bracket Nuts | 7 Nm | - | 62 in. lbs. |
Power Distribution
| Part | Nm | in. lbs. |
| B+ Input to Power Distribution Center PDC Fasteners | 8 Nm | 71 in. lbs. |
| PDC Lower Cover Fastener | 8 Nm | 71 in. lbs. |
| PDC To Wire Harness Connector | 5 Nm | 44 in. lbs. |
Ignition Controls
| Part | Nm | ft. lbs. | in. lbs. | Notes |
| Camshaft Position Sensor Bolt | 9 Nm | - | 80 in. lbs. | |
| Ignition Coil Capacitor Bolt | 10 Nm | - | 89 in. lbs. | |
| Ignltion Coil Fasteners | 8 Nm | - | 71 in. lbs. | |
| Knock Sensor | 22 Nm | 16 ft. lbs. | - | Replace fastener with new one. |
| Spark Plugs | 20 Nm | 15 ft. lbs. | - | |
| Variable Valve Timing Solenoids | 4 Nm | - | 35 in. lbs. |
| Part | Nm | ft. lbs. |
| EGR blocker plate to cylinder head | 23 Nm | 17 ft. lbs. |
| EGR cooler bracket nuts | 23 Nm | 17 ft. lbs. |
| EGR cooler tube to cylinder head | 23 Nm | 17 ft. lbs. |
| EGR temperature sensor | 37 Nm | 27 ft. lbs. |
| EGR tube to EGR valve | 10 Nm | 7 ft. lbs. |
| EGR tube to EGR cooler | 10 Nm | 7 ft. lbs. |
| EGR valve to intake manifold nuts | 10 Nm | 7 ft. lbs. |
| Part | Nm | ft. lbs. | Notes |
| Front driveshaft to front axle flange bolts | 121 Nm | 89 ft. lbs. | Replace fastener with new one. Torque and secure in a crisscross pattern. |
| Front driveshaft to transfer case flange bolts | 39 Nm | 29 ft. lbs. | Replace fastener with new one. Torque and secure in a crisscross pattern. |
| Rear driveshaft carrier bearing to frame | 62 Nm | 46 ft. lbs. | |
| Rear driveshaft to transfer case flange bolts | 39 Nm | 29 ft. lbs. | Replace fastener with new one. Torque and secure in a crisscross pattern. |
| Rear driveshaft to rear axle flange bolts | 39 Nm | 29 ft. lbs. | Replace fastener with new one. Torque and secure in a crisscross pattern. |
| Part | Nm | ft. lbs. | in. lbs. |
| A/C condenser bolts | 5 Nm | - | 45 in. lbs. |
| Belt tensioner bolt | 50 Nm | 37 ft. lbs. | - |
| Block heater bolt | 12 Nm | 9 ft. lbs. | - |
| Coolant crossover bolts | 11 Nm | 8 ft. lbs. | - |
| Cooling fan bolts | 8 Nm | 71 ft. lbs. | - |
| Coolant recovery bottle bolts | 10 Nm | - | 89 in. lbs. |
| Left idler pulley bolts | 25 Nm | 18 ft. lbs. | - |
| Center idler pulley bracket M8 bolt | 25 Nm | 18 ft. lbs. | - |
| Center idler pulley bracket M10 bolt | 55 Nm | 41 ft. lbs. | - |
| Center idler pulley bracket to generator bolts | 24 Nm | 18 ft. lbs. | - |
| Center idler pulley bolt | 50 Nm | 37 ft. lbs. | - |
| Radiator brace bolt | 10 Nm | - | 89 in. lbs. |
| Radiator to body bolts | 11 Nm | 8 ft. lbs. | - |
| Right idler pulley bracket bolts | 24 Nm | 18 ft. lbs. | - |
| Right idler pulley bolt | 25 Nm | 18 ft. lbs. | - |
| Thermostat housing bolts | 10 Nm | - | 89 in. lbs. |
| Water pump M6 bolts | 11 Nm | 8 ft. lbs. | - |
| Water pump M8 bolts | 23 Nm | 17 ft. lbs. | - |
| Part | Nm | ft. lbs. | in. lbs. | Notes |
| 3.6L Pressure plate to flywheel bolts | 30 Nm | 22 ft. lbs. | - | Replace fastener with new one. |
| Clutch master cylinder nuts | 17 Nm | 13 ft. lbs. | - | |
| Clutch pedal bracket to dash | 20 Nm | 15 ft. lbs. | - | |
| Clutch pipe to transmission bolts | 18 Nm | 13 ft. lbs. | - | |
| Clutch slave cylinder | 10 Nm | - | 89 in. lbs. | |
| Flywheel to crankshaft bolts | 52 Nm | 38 ft. lbs. | - | Replace fastener with new one. |
| Part | Nm | ft. lbs. | in. lbs. | Notes |
| Front Bumper Support Bracket Nuts | 20 Nm | 15 ft. lbs. | - | |
| Front Bumper to Frame Nuts | 90 Nm | 66 ft. lbs. | - | |
| Front Skid Piate Bracket to Frame Bracket Bolts | 50 Nm | 37 ft. lbs. | - | |
| Front Skid Plate Bolts | 25 Nm | 18 ft. lbs. | - | |
| Front Skid Plate Pencil Brace to Front Skid Plate Bracket | 9 Nm | 7 ft. lbs. | 80 in. lbs. | |
| Hitch to Frame Bolts | 90 Nm | 66 ft. lbs. | - | |
| Rear Bumper Guard to Bracket Bolts | 48 Nm | 35 ft. lbs. | - | Replace fastener with new one. |
| Rear Bumper Guard to Bumper Bolts | 48 Nm | 35 ft. lbs. | - | Replace fastener with new one. |
| Rear Bumper to Hitch Bolts - Bottom | 30 Nm | 22 ft. lbs. | - | |
| Rear Bumper to Hitch Bolts - Center | 30 Nm | 22 ft. lbs. | - | |
| Rear Bumper to Hitch Nuts | 30 Nm | 22 ft. lbs. | - | |
| Skid Plate Fuel Tank to Transmission Crossmember | 65 Nm | 48 ft. lbs. | - | |
| Skid Plate to Frame | 65 Nm | 48 ft. lbs. | - | |
| Tow Hook Bolts - Front | 12 Nm | 94 ft. lbs. | - | |
| Tow Hook to Hitch Bolts | 165 Nm | 122 ft. lbs. | - | |
| Trailer Hitch to Bracket Bolts | 105 Nm | 77 ft. lbs. | - | |
| Trailer Hitch to Frame Bolts - Lower | 165 Nm | 122 ft. lbs. | - | |
| Trailer Hitch to Frame Bolts - Rear | 170 Nm | 125 ft. lbs. | - | |
| Transfer Case Skid Plate to Crossmember Bolts | 75 Nm | 55 ft. lbs. | - | |
| Transfer Case Skid Plate to Frame Bolts | 75 Nm | 55 ft. lbs. | - | |
| Transfer Case Skid Plate to Fuel Tank Nut | 20 Nm | 15 ft. lbs. | - | |
| Transmission Crossmember to Bracket Bolts/Nuts | 115 Nm | 85 ft. lbs. | - | |
| Transmission Crossmember to Frame Bolts | 70 Nm | 52 ft. lbs. | - | |
| Transmission Crossmember to Skid Plate | 65 Nm | 48 ft. lbs. | - |
ABS
| Part | Nm | ft. lbs. | in. lbs. |
| Anti-lock Brake System (ABS) Module Bolt | 8 Nm | - | 70 in. lbs. |
| Front Wheel Speed Sensor Bracket Bolt | 30 Nm | 22 ft. lbs. | - |
| Front Wheel Speed Sensors Bolt | 7 Nm | - | 62 in. lbs. |
| Hydraulic Control Unit (HCU) Bracket Bolts | 5 Nm | - | 44 in. lbs. |
| Hydraulic Control Unit (HCU) Brake Line Flare Nuts | 20 Nm | 15 ft. lbs. | - |
| Rear Wheel Speed Sensors Bolt | 10 Nm | 7 ft. lbs. | - |
Brakes
| Part | Nm | ft. lbs. | in. lbs. |
| Brake Booster Nuts | 30 Nm | 22 ft. lbs. | - |
| Brake Hose Frame Bolt | 11 Nm | 8 ft. lbs. | - |
| Brake Rotor Splash Shield Bolts | 10 Nm | 7 ft. lbs. | - |
| Electric Vacuum Pump (EVP) Bolts | 8 Nm | - | 71 in. lbs. |
| Electric Vacuum Pump (EVP) Bracket Bolts | 25 Nm | 18 ft. lbs. | - |
| Front Brake Hose Axle Bolt | 8 Nm | - | 71 in. lbs. |
| Front Brake Hose Lower Control Arm Nut | 18 Nm | 13 ft. lbs. | - |
| Front Brake Line Hose Flare Nut | 20 Nm | 15 ft. lbs. | - |
| Front Caliper Adapter Bolt | 195 Nm | 144 ft. lbs. | - |
| Front Caliper Bleed Screw | 10 Nm | 7 ft. lbs. | - |
| Front Caliper Bolts | 37 Nm | 27 ft. lbs. | - |
| Front Caliper Brake Hose Banjo Bolt | 35 Nm | 26 ft. lbs. | - |
| Front Rotor Screw | 20 Nm | 15 ft. lbs. | - |
| Master Cylinder Brake Line Flare Nuts | 23 Nm | 17 ft. lbs. | - |
| Master Cylinder Nuts | 18 Nm | 13 ft. lbs. | - |
| Park Brake Cable Boot Nuts | 9 Nm | - | 80 in. lbs. |
| Park Brake Cable Bracket Bolts | 70 Nm | 52 ft. lbs. | - |
| Park Brake Cable Guide Nut | 11 Nm | 8 ft. lbs. | - |
| Park Brake Lever Nuts | 22 Nm | 16 ft. lbs. | - |
| Park Brake Lever Sled Nuts | 24 Nm | 18 ft. lbs. | - |
| Pedal Sled Nuts | 30 Nm | 22 ft. lbs. | - |
| Primary Brake Line Flare Nut at Hydraulic Control Unit (HCU) | 25 Nm | 18 ft. lbs. | - |
| Rear Brake Line Hose Flare Nut | 20 Nm | 15 ft. lbs. | - |
| Rear Caliper Adapter Bolt | 125 Nm | 92 ft. lbs. | - |
| Rear Caliper Bleed Screw | 10 Nm | 7 ft. lbs. | - |
| Rear Caliper Bolts | 37 Nm | 27 ft. lbs. | - |
| Rear Caliper Brake Hose Banjo Bolt | 35 Nm | 26 ft. lbs. | - |
| Rear Rotor Screw | 20 Nm | 15 ft. lbs. | - |
| Secondary Brake Line Flare Nut at Hydraulic Control Unit (HCU) | 18 Nm | 13 ft. lbs. | - |
| Part | Nm | ft. lbs. | in. lbs. | Notes |
| A-pillar grab handle bolts | 9 Nm | - | 80 in. lbs. | |
| B-pillar grab handle bolts | 9 Nm | - | 80 in. lbs. | |
| B-pillar trim to sport bar | 9 Nm | - | 80 in. lbs. | |
| Backlite to hard top bolts | 11 Nm | 8 ft. lbs. | - | |
| Body isolator A-pillar bolt | 125 Nm | 92 ft. lbs. | - | Apply thread locking compound. |
| Body isolator B-pillar bolt - body bolt | 108 Nm | 80 ft. lbs. | - | Apply thread locking compound. |
| Body isolator B-pillar bolt - frame nuts | 49 Nm | 36 ft. lbs. | - | |
| Body isolator C-pillar bolt - body bolt | 125 Nm | 92 ft. lbs. | - | Apply thread locking compound. |
| Body isolator C-pillar bolt - frame nuts | 49 Nm | 36 ft. lbs. | - | |
| Body isolator front - body nuts | 49 Nm | 36 ft. lbs. | - | |
| Body isolator front - frame nut | 125 Nm | 92 ft. lbs. | - | |
| Bulkhead to instrument panel bolts | 20 Nm | 15 ft. lbs. | - | |
| Cargo box hold down bolts | 80 Nm | 59 ft. lbs. | - | |
| Cowl panel end bolts | 9 Nm | - | 80 in. lbs. | |
| Cowl side panel to body bolts | 8 Nm | - | 71 in. lbs. | |
| Door armrest bolts | 8 Nm | - | 71 in. lbs. | |
| Door beam bracket to hinge pillar | 23 Nm | 17 ft. lbs. | - | |
| Door carrier plate to door bolts | 7 Nm | - | 62 in. lbs. | |
| Door check strap to door nuts | 11 Nm | 8 ft. lbs. | - | |
| Door check strap to pillar bolt | 9 Nm | - | 80 in. lbs. | |
| Door exterior handle screw | 1.9 Nm | - | 17 in. lbs. | |
| Door exterior handle support bracket screw | 1.9 Nm | - | 17 in. lbs. | |
| Door frame rail - front | 8 Nm | - | 71 in. lbs. | |
| Door frame rail - rear | 8 Nm | - | 71 in. lbs. | |
| Door glass channel to door nut | 11 Nm | 8 ft. lbs. | - | |
| Door glass to regulator bolts | 14 Nm | 10 ft. lbs. | - | |
| Door hinge pivot nuts | 5 Nm | - | 44 in. lbs. | |
| Door hinge to door bolts | 28 Nm | 21 ft. lbs. | - | |
| Door hinge to pillar bolts | 48 Nm | 35 ft. lbs. | - | |
| Door interior handle bolt | 7 Nm | - | 62 in. lbs. | |
| Door latch bolts | 7 Nm | - | 62 in. lbs. | |
| Door striker bolts | 17 Nm | 13 ft. lbs. | - | |
| Exterior mirror fasteners | 6 Nm | - | 53 in. lbs. | |
| Fender to body bolts | 7 Nm | - | 62 in. lbs. | |
| Folding top lift assist to sport bar bolts | 14 Nm | 10 ft. lbs. | - | |
| Front fender flare bolts | 7 Nm | - | 62 in. lbs. | |
| Front seat back bolts | 73 Nm | 54 ft. lbs. | - | |
| Front seat track back bolts | 48 Nm | 36 ft. lbs. | - | |
| Front seat track bolts | 48 Nm | 36 ft. lbs. | - | |
| Front wheelhouse splash shield to fender flare screws | 5 Nm | - | 44 in. lbs. | |
| Hard top front receiver bracket bolts | 12 Nm | 9 ft. lbs. | - | |
| Hard top to B-pillar bolts | 12 Nm | 9 ft. lbs. | - | |
| Hard top to body bolts | 12 Nm | 9 ft. lbs. | - | |
| Hood catch bracket to hood nuts | 5 Nm | - | 44 in. lbs. | |
| Hood catch to fender nuts | 10 Nm | - | 89 in. lbs. | |
| Hood hinge to body bolts | 25 Nm | 18 ft. lbs. | - | |
| Hood hinge to hood bolts | 20 Nm | 15 ft. lbs. | - | |
| Hood pop up spring bolt | 10 Nm | - | 89 in. lbs. | |
| Hood prop rod bolts | 8 Nm | - | 71 in. lbs. | |
| Hood safety hook to hood bolts | 10 Nm | - | 89 in. lbs. | |
| Instrument panel carrier bolts | 12 Nm | 9 ft. lbs. | - | |
| Instrument panel cowl bolts | 11 Nm | 8 ft. lbs. | - | |
| Instrument panel dash bolts | 6 Nm | - | 53 in. lbs. | |
| Instrument panel to center floor bolt | 10 Nm | - | 89 in. lbs. | |
| Instrument panel to center floor nut | 10 Nm | - | 89 in. lbs. | |
| Power top assembly to body screws | 5 Nm | - | 44 in. lbs. | |
| Radiator crossmember bolts | 11 Nm | 8 ft. lbs. | - | |
| Radiator crossmember brace bolts | 9 Nm | - | 80 in. lbs. | |
| Rearview mirror to header screw | 6 Nm | - | 56 in. lbs. | |
| Second row seat bolts | 48 Nm | 36 ft. lbs. | - | |
| Second row seat frame bolts | 40 Nm | 35 ft. lbs. | - | |
| Second row seat pivot bolts | 45 Nm | 33 ft. lbs. | - | |
| Side step/rock rail nuts | 15 Nm | 11 ft. lbs. | - | |
| Side step/rock rail to body bolts | 28 Nm | 21 ft. lbs. | - | |
| Soft top #1 bow cable bracket fasteners | 5 Nm | - | 44 in. lbs. | |
| Soft top #1 bow to linkage fasteners | 5 Nm | - | 44 in. lbs. | |
| Soft top #2 bow to linkage fasteners | 7 Nm | - | 62 in. lbs. | |
| Soft top #3 bow to linkage fasteners | 7 Nm | - | 62 in. lbs. | |
| Soft top #4 bow to linkage fasteners | 7 Nm | - | 62 in. lbs. | |
| Soft top #5 bow to linkage fasteners | 7 Nm | - | 62 in. lbs. | |
| Soft top center lower body rail fasteners | 12 Nm | 9 ft. lbs. | - | |
| Soft top comer lower body rails fasteners | 23 Nm | 17 ft. lbs. | - | |
| Soft top comer lower body rails to center rail fasteners | 10 Nm | - | 89 in. lbs. | |
| Soft top J-rail retainer fasteners | 7 Nm | - | 62 in. lbs. | |
| Soft top to front door rail fasteners | 9 Nm | - | 80 in. lbs. | |
| Soft top to rear door rail fasteners | 5 Nm | - | 44 in. lbs. | |
| Soft top upper door rail fasteners | 4 Nm | - | 35 in. lbs. | |
| Tailgate cable to box anchor bolts | 23 Nm | 17 ft. lbs. | - | |
| Tailgate cable to tailgate bolt | 15 Nm | 11 ft. lbs. | - | |
| Tailgate cleat to cargo box fastener | 16 Nm | 12 ft. lbs. | - | |
| Tailgate cover fasteners | 7 Nm | - | 62 in. lbs. | |
| Tailgate latch bolts | 18 Nm | 13 ft. lbs. | - | |
| Tailgate latch control assembly nuts | 6 Nm | - | 53 in. lbs. | |
| Tailgate latch striker | 20 Nm | 15 ft. lbs. | - | |
| Tailgate lock plate screw | 23 Nm | 17 ft. lbs. | - | |
| Tailgate pivot bracket to box | 65 Nm | 48 ft. lbs. | - | |
| Tailgate pivot bracket to tailgate | 33 Nm | 24 ft. lbs. | - | |
| Tonneau bracket to bedside fasteners | 5 Nm | - | 44 in. lbs. | |
| Tonneau bracket to bulkhead bolts | 15 Nm | 11 ft. lbs. | - | |
| Trough cross body to body fasteners | 5 Nm | - | 44 in. lbs. | |
| Trough left to body in white fasteners | 5 Nm | - | 44 in. lbs. | |
| Utility rail fasteners | 6 Nm | - | 53 in. lbs. | |
| Windshield frame to header bolts | 17 Nm | 12 ft. lbs. | - | |
| Windshield hinge to cowl fram bolts | 30 Nm | 22 ft. lbs. | - | |
| Windshield hinge to windshield frame bolts | 25 Nm | 18 ft. lbs. | - |
| Part | Nm | ft. lbs. | Notes |
| Axle retainer nut | 80 Nm | 59 ft. lbs. | |
| Bearing cap bolts | 95 Nm | 70 ft. lbs. | |
| Differential cover bolts | 41 Nm | 30 ft. lbs. | Replace fastener with new one. |
| Differential drain plug | 34 Nm | 25 ft. lbs. | |
| Differential fill plug | 34 Nm | 25 ft. lbs. | |
| Pinion nut | 488 Nm | 360 ft. lbs. | Replace fastener with new one. |
| Ring gear bolts | 100 Nm + 57.5° Turn | 74 ft. lbs. + 57.5° Turn | Replace fastener with new one. |
| Rear axle vent fitting | 22 Nm | 17 ft. lbs. |
| Part | Nm | ft. lbs. | Notes |
| Axle Shaft Nut | 136 Nm | 100 ft. lbs. | Replace fastener with new one. |
| Bearing Cap Bolts | 108 Nm | 80 ft. lbs. | |
| Differential Cover Bolts | 20 Nm + 20° Turn | 15 ft. lbs. + 20° Turn | |
| Differential Drain Plug | 34 Nm | 25 ft. lbs. | |
| Differential Fill Plug | 34 Nm | 25 ft. lbs. | |
| Pinion Flange Nut | 217 Nm | 160 ft. lbs. | Replace fastener with new one. |
| Ring Gear Bolts | 136 Nm | 100 ft. lbs. | Replace fastener with new one. |
| Front Axle Disconnect Skid Plate Bolts | 42 Nm | 31 ft. lbs. | |
| Front Axle Disconnect Bolts | 18 Nm | 13 ft. lbs. | Replace fastener with new one. |
The following guides contain all OEM torque specifications for the Jeep Gladiator JT. These values are based on when the vehicle was launched in 2020 and may not account for newer powertrains, drivetrains, or part revisions.
Axles
Bumpers and Frame
Clutch
Cooling System
Driveshaft
EGR
Engine
Evap Canister
Exhaust
Fuel Delivery
Fuel Injection
HVAC
Restraints
Steering
| Trim | Torque | Lug Bolt Size | Socket Size | Hub Size |
| Sport | 130 ft. lbs. [176 Nm] | M14 x 1.50 | 22 mm | 71.5 mm |
| Sahara | 130 ft. lbs. [176 Nm] | M14 x 1.50 | 22 mm | 71.5 mm |
| Rubicon | 130 ft. lbs. [176 Nm] | M14 x 1.50 | 22 mm | 71.5 mm |
All wheels should be torqued in a star pattern while on the ground.
| Part | Nm | ft. lbs. | in. lbs. |
| Spare tire carrier bolt | 17.5 Nm | 13 ft. lbs. | - |
| Spare tire carrier lug nut | 80 Nm | 59 ft. lbs. | - |
| Tire pressure sensor nut | 1.4 Nm | - | 12 in. lbs. |
Automatic Transmission
| Part | Nm | ft. lbs. | in. lbs. | Notes |
| Engine to bell-housing bolt | 60 Nm | 44 ft. lbs. | - | |
| Extension housing to transmission bolt | 27 Nm | 20 ft. lbs. | - | |
| Manual park release lever shaft nut | 10 Nm | - | 89 in. lbs. | |
| Manual park release cable to transmission | 20 Nm | 15 ft. lbs. | - | |
| Manual park release grommet to bracket | 9 Nm | - | 79 in. lbs. | |
| Manual park release lever to transmission shaft | 20 Nm | 15 ft. lbs. | - | |
| Manual park release shield to transmission | 17 Nm | 12 ft. lbs. | - | |
| Output shaft flange nut | 60 Nm | 44 ft. lbs. | - | |
| Output speed sensor bolt | 8 Nm | - | 71 in. lbs. | |
| Park pawl lock rod guide plate bolt | 10 Nm | - | 89 in. lbs. | |
| Park pawl shaft plug | 35 Nm | 26 ft. lbs. | - | |
| Shifter assembly bolts | 9 Nm | - | 79 in. lbs. | |
| Transmission oil pan bolt | 10 Nm | - | 89 in. lbs. | |
| Transmission oil pan drain plug | 9 Nm | - | 80 in. lbs. | |
| Transmission oil fill plug | 35 Nm | 26 ft. lbs. | - | |
| Transmission oil pump housing to cover bolt | 5 Nm + 45° Turn | - | 44 in. lbs. + 45° Turn | |
| Torque converter to flex plate bolt | 55 Nm | 41 ft. lbs. | - | Replace fastener with new one. NOTE: If old fastener must be reused, Loc-Tite must be applied to the threads. |
| Transmission mount to adapter | 30 Nm | 22 ft. lbs. | - | |
| Shift lever assembly to floor pan bolts | 8 Nm | - | 70 in. lbs. | |
| Transmission shift knob | 2 Nm | - | 17 in. lbs. | |
| Transfer case shift knob | 2 Nm | - | 17 in. lbs. | |
| Manual park release to shift lever assembly | 8 Nm | - | 70 in. lbs. |
Manual Transmission
| Part | Nm | ft. lbs. | in. lbs. |
| Drain plug | 30 Nm | 22 ft. lbs. | - |
| Fill plug | 30 Nm | 22 ft. lbs. | - |
| Shifter base to floor assembly bolts | 8 Nm | - | 70 in. lbs. |
| Control shaft cover assembly bolts | 25 Nm | 18 ft. lbs. | - |
| Shift lever bolt | 8 Nm | - | 70 in. lbs. |
| Output speed sensor bolt | 8 Nm | - | 70 in. lbs. |
| Transmission stroke sensor bolts | 25 Nm | 18 ft. lbs. | - |
| Input shaft retainer bolts | 9 Nm | - | 80 in. lbs. |
| Clutch release bearing retainer bolts | 10 Nm | - | 88 in. lbs. |
| Output shaft lock nut | - | - | - |
| Shift fork detent bolts | 25 Nm | 18 ft. lbs. | - |
| Shift fork support bolts | 8 Nm | - | 71 in. lbs. |
| Reverse idler gear shaft bolts | 20 Nm | 15 ft. lbs. | - |
| Countershaft bolt | 100 Nm | 74 ft. lbs. | - |
| Transmission case bolts | 40 Nm | 30 ft. lbs. | - |
| Transmission oil separator bolts | - | - | - |
| Transmission shift guide plate bolts | - | - | - |
| Transmission mount bolts | 47 Nm | 35 ft. lbs. | - |
| Shift cable retaining bracket | 22 Nm | 16 ft. lbs. | - |
