Head Honcho

April 30th at 1:22pm

Thread Creator
New
#14
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

The following guides contain all OEM torque specifications for the Jeep Wrangler JL. These values are based on when the vehicle was launched in 2018 and may not account for newer powertrains, drivetrains, or part revisions.

Axles

Body
Brakes

ABS
Brakes

Bumpers and Frame
Clutch
Cooling System
EGR
Engine

Evap Canister
Exhaust
Fuel Delivery
Fuel Injection
HVAC
Prop Shaft
Restraints
Steering

Suspension

Front
Rear

Transfer Case (Full-Time and Selec-Trac)
Transmission

Wheels
Wheel Bolts

Axle Lock

Head Honcho

April 30th at 3:51pm

Thread Creator
New
#15
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

ABS

Part	Nm	ft. lbs.	in. lbs.
Anti-lock Brake System (ABS) Bolt	8 Nm	-	70 in. lbs.
Front Brake Lines at Hydraulic Control Unit	23 Nm	17 ft. lbs	-
Front Wheel Speed Sensors Bolt	7 Nm	5 ft. lbs.	62 in. lbs.
Front Wheel Speed Sensor Routing Bracket Bolt	29 Nm	21 ft. lbs.	-
Hydraulic Control Unit (HCU) Bracket Bolts	9 Nm	7 ft. lbs.	80 in. lbs.
Primary Brake Lines to Hydraulic Control Unit	25 Nm	18 ft. lbs.	-
Rear Wheel Speed Sensors Bolt	11 Nm	8 ft. lbs.	97 in. lbs.
Rear Brake Lines to Hydraulic Control Unit	23 Nm	17 ft. lbs.	-
Secondary Brake Lines to Hydraulic Control Unit	23 Nm	17 ft. lbs.	-

Axle Lock

Head Honcho

April 30th at 3:56pm

Thread Creator
New
#16
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Axle M186 Front

Part	Nm	ft. lbs.	Notes
Half Shaft Nut	136 Nm	100 ft. lbs.
Bearing Cap Bolts	108 Nm	80 ft. lbs.
Differential Cover Bolts	First Pass - 16 Nm, Second Pass - 41 Nm	First Pass - 12 ft. lbs, Second Pass - 30 ft. lbs.	Replace fastener with new one.
Drain Plug	34 Nm	25 ft. lbs.
Fill Plug	34 Nm	25 ft. lbs.
Hub Bearing Bolts	100 Nm	74 ft. lbs
Pinion Nut	217 Nm	160 ft. lbs.	Replace fastener with new one.
Ring Gear Bolts	108 Nm	80 ft. lbs.	Replace fastener with new one.
Front Axle Disconnect Skid Plate Bolts	42 Nm	31 ft. lbs
Front Axle Disconnect Bolts	18 Nm	13 ft. lbs.	Replace fastener with new one.

Axle Lock

Head Honcho

April 30th at 4:01pm

Thread Creator
New
#17
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Axle M210 Front

Part	Nm	ft. lbs.	Notes
Axle Shaft Nut	136 Nm	100 ft. lbs.	Replace fastener with new one.
Bearing Cap Bolts	108 Nm	80 ft. lbs.
Differential Cover Bolts	41 Nm	30 ft. lbs
Differential Drain Plug	34 Nm	25 ft. lbs.
Differential Fill Plug	34 Nm	25 ft. lbs.
Pinion Flange Nut	217 Nm	160 ft. lbs.	Replace fastener with new one.
Ring Gear Bolts	136 Nm	100 ft. lbs.	Replace fastener with new one.
Front Axle Disconnect Skid Plate Bolts	42 Nm	31 ft. lbs.
Front Axle Disconnect Bolts	18 Nm	13 ft. lbs.	Replace fastener with new one.

Axle Lock

Head Honcho

April 30th at 4:07pm

Thread Creator
New
#18
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Axle M200 Rear

Part	Nm	ft. lbs.	Notes
Axle retainer nuts	80 Nm	59 ft. lbs.
Bearing cap bolts	65 Nm	48 ft. lbs.
Differential cover bolts	41 Nm	30 ft. lbs.	Replace fastener with new one.
Drain plug	34 Nm	25 ft. lbs.
Fill plug	34 Nm	25 ft. lbs.
Pinion nut	240-550 Nm	177-406 ft. lbs.	Replace fastener with new one.
Ring gear bolts	180-240 Nm	133-177 ft. lbs.	Replace fastener with new one.

Axle Lock

Head Honcho

April 30th at 4:18pm

Thread Creator
New
#19
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Axle M220 Rear

Part	Nm	ft. lbs.	Notes
Axle retainer nut	80 Nm	59 ft. lbs.
Bearing cap bolts	95 Nm	70 ft. lbs.
Differential cover bolts	41 Nm	30 ft. lbs.	Replace fastener with new one.
Differential drain plug	34 Nm	25 ft. lbs.
Differential fill plug	34 Nm	25 ft. lbs.
Pinion nut	488 Nm	360 ft. lbs.	Replace fastener with new one.
Ring gear bolts	210 Nm	155 ft. lbs.	Replace fastener with new one.
Rear axle vent fitting	22 Nm	17 ft. lbs.

Axle Lock

Head Honcho

April 30th at 4:31pm

Thread Creator
New
#20
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Body

Part	Nm	ft. lbs.	in. lbs.	Notes
A-pillar grab handle bolts	9 Nm	-	80 in. lbs.
B-pillar grab handle bolts	9 Nm	-	80 in. lbs.
Backlite to hardtop bolts	11 Nm	8 ft. lbs.	-
Body isolator front: body nuts	48 Nm	35 ft. lbs.	-
Body isolator front: frame nuts	66 Nm + 155° Turn	49 ft. lbs. + 155° Turn	-
Body isolator A-pillar bolt	125 Nm	92 ft. lbs.	-
Body isolator B-pillar bolt: body bolt	125 Nm	92 ft. lbs	-
Body isolator B-pillar bolt: frame nuts	48 Nm	35 ft. lbs.	-
Body isolator C-pillar bolt: body bolt	125 Nm	92 ft. lbs.	-
Body isolator C-pillar bolt: frame nuts	48 Nm	35 ft. lbs.	-
Body isolator D-pillar bolt: body bolt	125 Nm	92 ft. lbs.	-
Body isolator D-pillar bolt: frame nuts	48 Nm	35 ft. lbs.	-
Cargo rail trim screws	7 Nm	-	62 in. lbs.
Cowl panel end bolts	9 Nm	-	80 in. lbs.
Cowl side panel-to-body- bolts	8 Nm	-	71 in. lbs.
Door armrest bolts	8 Nm	-	71 in. lbs.
Door carrier plate to door bolts	7 Nm	-	62 in. lbs.
Door check strap to door nuts	11 Nm	8 ft. lbs.	-
Door check strap to pillar bolt	9 Nm	-	80 in. lbs.
Door exterior handle support bracket screw	1.9 Nm	-	17 in. lbs.
Door exterior handle screw	1.9 Nm	-	17 in. lbs.
Door glass to regulator bolts	14 Nm	10 ft. lbs.	-
Door hinge pivot nuts	6 Nm	-	53 in. lbs.
Door hinge to door bolts	28 Nm	21 ft. lbs.	-
Door hinge to pillar bolts	48 Nm	35 ft. lbs.	-
Door interior handle bolt	7 Nm	-	62 in. lbs.
Door latch bolts	7 Nm	-	62 in. lbs.
Door striker bolts	26 Nm	19 ft. lbs.	-
Exterior mirror fasteners	9 Nm	-	80 in. lbs.
Fender to body bolts	9 Nm	-	80 in. lbs.
Folding top lift assist to sport bar bolts	13.5 Nm	10 ft. lbs.	-
Front fender flare bolts	7 Nm	-	62 in. lbs.
Front seat bolts	50 Nm	37 ft. lbs.	-
Front seat back bolts	73 Nm	54 ft. lbs.	-
Hard top to body bolts	12 Nm	9 ft. lbs.	-
Hard top to B-pillar bolts	12 Nm	9 ft. lbs.	-
Hard top front receiver bracket bolts	12 Nm	9 ft. lbs.	-
Hood catch bracket to hood nuts	7 Nm	-	62 in. lbs.
Hood catch to fender nuts	15 Nm	11 ft. lbs	-
Hood hinge to body bolts	25 Nm	18 ft. lbs	-
Hood hinge to hood bolts	17 Nm	13 ft. lbs.	-
Hood pop up spring bolt	10 Nm	-	89 in. lbs.
Hood prop rod bolts	8 Nm	-	71 in. lbs.
Hood safety hook to hood bolts	10 Nm	-	89 in. lbs.
Instrument panel carrier bolts	12 Nm	9 ft. lbs.	-
Instrument panel cowl bolts	11 Nm	8 ft. lbs.	-
Instrument panel dash bolts	6 Nm	-	53 in. lbs.
Instrument panel to center floor nut	10 Nm	-	89 in. lbs.
Radiator crossmember bolts	11 Nm	8 ft. lbs.	-
Radiator crossmember brace bolts	9 Nm	-	80 in. lbs
Rear lift arm bolt	-	-	-
Rearview mirror to header bolts	8 Nm	-	71 in. lbs.
Rock rail / side steps to body bolts	28 Nm	21 ft. lbs.	-
Rock rail / side steps rail nuts	15 Nm	11 ft. lbs.	-
Second row seat armrest bolt	25 Nm	18 ft. lbs.	-
Second row seat back bolts	45 Nm	33 ft. lbs.	-
Second row seat bolts	64 Nm	47 ft. lbs.	-
Second row seat headrest bolts: bench seat	8 Nm	-	71 in. lbs.
Second row seat headrest bolts: split seat	8 Nm	-	71 in. lbs.
Second row seat feet bolts	64 Nm	47 ft. lbs.	-
Second row seat nuts	70 Nm	52 ft. lbs.	-
Second row seat pivot bolts	45 Nm	33 ft. lbs.	-
Second row seat pivot nuts	19 Nm	14 ft. lbs.	-
Soft top lift assist bolts	-	-	-
Soft top linkage bolts	12 Nm	9 ft. lbs.	-	Apply thread locking compound.
Swing gate check strap to tailgate bolt	11 Nm	8 ft. lbs.	-
Swing gate exterior handle screw	1.9 Nm	-	17 in. lbs.
Swing gate hinge to body bolts	28 Nm	21 ft. lbs.	-
Swing gate hinge to tailgate bolts	48 Nm	35 fb. lbs.	-
Swing gate latch bolts	5 Nm	-	44 in. lbs.
Swing gate stabilizer bolts	10 Nm	-	89 in. lbs.
Swing gate striker bolts	26 Nm	19 ft. lbs.	-
Windshield frame to header bolts	16.5 Nm	12 ft. lbs.	-
Windshield hinge to cowl frame bolts	30 Nm	22 ft. lbs.	-
Windshield hinge to windshield frame bolts	25 Nm	18 ft. lbs.	-
Windshield wiper	25 Nm	18 ft. lbs.	-

Axle Lock

Head Honcho

April 30th at 4:40pm

Thread Creator
New
#21
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Brakes

ABS

Part	Nm	ft. lbs.	in. lbs.
Anti-lock Brake System (ABS) Bolt	8 Nm	-	70 in. lbs.
Front Brake Lines at Hydraulic Control Unit	23 Nm	17 ft. lbs	-
Front Wheel Speed Sensors Bolt	7 Nm	5 ft. lbs.	62 in. lbs.
Front Wheel Speed Sensor Routing Bracket Bolt	29 Nm	21 ft. lbs.	-
Hydraulic Control Unit (HCU) Bracket Bolts	9 Nm	7 ft. lbs.	80 in. lbs.
Primary Brake Lines to Hydraulic Control Unit	25 Nm	18 ft. lbs.	-
Rear Wheel Speed Sensors Bolt	11 Nm	8 ft. lbs.	97 in. lbs.
Rear Brake Lines to Hydraulic Control Unit	23 Nm	17 ft. lbs.	-
Secondary Brake Lines to Hydraulic Control Unit	23 Nm	17 ft. lbs.	-

Brakes

Part	Nm	ft. lbs.	in. lbs.
Brake booster nuts	24 Nm	18 ft. lbs	-
Brake rotor splash shield bolts	11 Nm	8 ft. lbs	93 in. lbs.
Electric vacuum pump bolts	8 Nm	6 ft. lbs.	71 in. lbs.
Front brake hose to axle	11 Nm	8 ft. lbs.	97 in. lbs.
Front brake hose upper bolt	13 Nm	10 ft. lbs.	115 in. lbs.
Front brake caliper bolts	37 Nm	27 ft. lbs.	-
Front caliper brake hose banjo bolt	35 Nm	26 ft. lbs.	-
Front brake line to hose nut	20 Nm	15 ft. lbs.	-
Front brake hose to frame bolt	11 Nm	8 ft. lbs.	-
Front caliper adapter bolt	200 Nm	148 ft. lbs.	-
Front rotor screw	20 Nm	15 ft. lbs.	177 in. lbs.
Front brake hose bracket nut	18 Nm	13 ft. lbs.	-
Front caliper bleed screw	10 Nm	7 ft. lbs.	89 in. lbs.
Master cylinder brake lines	23 Nm	17 ft. lbs.	168 in. lbs.
Master cylinder nuts	18 Nm	13 ft. lbs.	159 in. lbs.
Primary hydraulic control unit [HCU] brake line nut	25 Nm	18 ft. lbs.	-
Parking brake lever nuts	25 Nm	19 ft. lbs	-
Pedal sled nuts	24 Nm	18 ft. lbs.	-
Reaction bracket to support bracket	19 Nm	14 ft. lbs.	-
Rear brake caliper bleed screw	10 Nm	7 ft. lbs.	89 in. lbs.
Rear brake caliper bolts	37 Nm	27 ft. lbs.	-
Rear brake rotor screw	20 Nm	15 ft. lbs.	177 in. lbs.
Rear brake hose to axle	22 Nm	16 ft. lbs.	-
Rear brake caliper adapter bolt	100 Nm	74 ft. lbs.	-
Rear brake hose axle bolt	22 Nm	16 ft. lbs.	-
Rear brake line to hose nut	20 Nm	15 ft. lbs.	-
Rear right brake line tube to tube connection	18 Nm	13 ft. lbs.	-
Rear brake caliper hose banjo bolt	35 Nm	26 ft. lbs.	-

Axle Lock

Head Honcho

April 30th at 5:02pm

Thread Creator
New
#22
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Bumpers and Frame

Part	Nm	ft. lbs.
Front bumper support bracket nuts	20 Nm	15 ft. lbs.
Front bumper to frame nuts	90 Nm	66 ft. lbs.
Hitch to frame bolts	90 Nm	66 ft. lbs.
Rear bumper to end cap bracket nuts	25 Nm	18 ft. lbs.
Rear bumper to frame bolts	90 Nm	66 ft. lbs.
Rear bumper to L-bracket fasteners	25 Nm	18 ft. lbs.
Rear bumper wing bracket nuts	35 Nm	26 ft. lbs.
Skid plate fuel tank to trans crossmember	65 Nm	48 ft. lbs.
Skid plate to frame	65 Nm	48 ft. lbs.
Tow hook bolts	127 Nm	94 ft. lbs.
Transfer case skid plate bolts	75 Nm	55 ft. lbs.
Transmission crossmember to bracket bolts/nuts	175 Nm	129 ft. lbs.
Transmission crossmember to frame bolts (right hand side)	70 Nm	52 ft. lbs.
Transmission crossmember to skid plate	75 Nm	55 ft. lbs.

Axle Lock

Head Honcho

April 30th at 5:20pm

Thread Creator
New
#23
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Clutch

Part	Nm	ft. lbs.	in. lbs.	Notes
3.6L Pressure plate to flywheel bolts	30 Nm	22 ft. lbs.	-	Replace fastener with new one.
Clutch master cylinder nuts	17 Nm	13 ft. lbs.	-
Clutch pedal bracket to dash	20 Nm	15 ft. lbs.	-
Clutch pipe to transmission bolts	18 Nm	13 ft. lbs.	-
Clutch slave cylinder	10 Nm	-	89 in. lbs.
Flywheel to crankshaft bolts	52 Nm	38 ft. lbs.	-	Replace fastener with new one.

Axle Lock

Head Honcho

April 30th at 5:29pm

Thread Creator
New
#24
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Cooling System

Part	Nm	ft. lbs.	in. lbs.
A/C condenser bolts	5 Nm	-	45 in. lbs.
Belt tensioner bolt	50 Nm	37 ft. lbs.	-
Block heater bolt	12 Nm	9 ft. lbs.	-
Coolant crossover bolts	11 Nm	8 ft. lbs.	-
Cooling fan bolts	8 Nm	71 ft. lbs.	-
Coolant recovery bottle bolts	10 Nm	-	89 in. lbs.
Left idler pulley bolts	25 Nm	18 ft. lbs.	-
Center idler pulley bracket M8 bolt	25 Nm	18 ft. lbs.	-
Center idler pulley bracket M10 bolt	55 Nm	41 ft. lbs.	-
Center idler pulley bracket to generator bolts	24 Nm	18 ft. lbs.	-
Center idler pulley bolt	50 Nm	37 ft. lbs.	-
Radiator brace bolt	10 Nm	-	89 in. lbs.
Radiator to body bolts	11 Nm	8 ft. lbs.	-
Right idler pulley bracket bolts	24 Nm	18 ft. lbs.	-
Right idler pulley bolt	25 Nm	18 ft. lbs.	-
Thermostat housing bolts	10 Nm	-	89 in. lbs.
Water pump M6 bolts	11 Nm	8 ft. lbs.	-
Water pump M8 bolts	23 Nm	17 ft. lbs.	-

Axle Lock

Head Honcho

April 30th at 5:33pm

Thread Creator
New
#25
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

EGR (Exhaust Gas Recirculation)

Part	Nm	ft. lbs.
EGR blocker plate to cylinder head	23 Nm	17 ft. lbs.
EGR cooler bracket nuts	23 Nm	17 ft. lbs.
EGR cooler tube to cylinder head	23 Nm	17 ft. lbs.
EGR temperature sensor	37 Nm	27 ft. lbs.
EGR tube to EGR valve	10 Nm	7 ft. lbs.
EGR tube to EGR cooler	10 Nm	7 ft. lbs.
EGR valve to intake manifold nuts	10 Nm	7 ft. lbs.

Axle Lock

Head Honcho

April 30th at 6:04pm

Thread Creator
New
#26
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Engine

Engine Block

Part	Nm	ft. lbs.	in. lbs.	Notes
Connecting rod cap bolts	20 Nm + 90° Turn	15 ft. lbs. + 90° Turn	-	Replace fastener with new one.
Crankshaft target wheel to counterweight bolts	11 Nm	8 ft. lbs.	-	Replace fastener with new one.
Crankshaft outer main bearing cap and windage tray M8 bolts	11 Nm	8 ft. lbs.	-
Crankshaft inner main bearing cap M11 bolts	21 Nm + 90° Turn	15 ft. lbs. + 90° Turn	-
Crankshaft side main bearing cap (tie bolt) M8 bolts	30 Nm	22 ft. lbs.	-
Crankshaft position (CKP) sensor to engine block M6 bolt	12 Nm	9 ft. lbs.	-
Engine block ground strap	20 Nm	15 ft. lbs.	-
Engine block heater - M6 bolt	12 Nm	9 ft. lbs.	-
Lower oil pan to upper oil pan - M6 bolts	11 Nm	8 ft. lbs.	-
Upper oil pan to engine block M8 bolts	23 Nm	17 ft. lbs.	-
Oil cooler to oil filter housing screws	12 Nm	-	106 in. lbs.
Upper oil pan to rear seal retainer M6 bolts	10 Nm	-	89 in. lbs.
Oil pan drain plug	27 Nm	20 ft. lbs.	-
Oil pressure sensor to oil filter housing	20 Nm	-	177 in. lbs.
Piston oil cooler jet to engine block bolt	6 Nm	-	53 in. lbs.
Oil filter housing/oil cooler to engine block M6 bolts	12 Nm	-	106 in. lbs.
Oil filter housing cap	25 Nm	18 ft. lbs.	-
Oil pump to engine block M6 bolts	12 Nm	-	106 in. lbs.
Oil level indicator to cylinder head bolt	18 Nm	13 ft. lbs.	-
Oil pump sprocket M8 bolt	26 Nm	18 ft. lbs.	-
Oil pump pick up tube bracket to windage tray M6 bolt	12 Nm	-	106 in. lbs.
Oil pump pick up tube to oil pump M6 bolt	12 Nm	-	106 in. lbs.

Cylinder Head

Part	Nm	ft. lbs.	in. lbs.	Notes
Camshaft bearing cap	10 Nm	-	89 in. lbs.
Camshaft chain tensioner (primary) bolt	12 Nm	9 ft. lbs.	-
Camshaft chain guide (primary) bolt	12 Nm	9 ft. lbs.	-
Camshaft chain idler sprocket bolt	26 Nm	19 ft. lbs.	-
Camshaft chain LH tensioner (secondary) bolt	12 Nm	9 ft. lbs.	-
Camshaft chain LH guide (secondary) bolt	12 Nm	9 ft. lbs.	-
Camshaft chain RH tensioner (secondary) bolt	12 Nm	9 ft. lbs.	-
Camshaft chain RH guide (secondary) bolt	12 Nm	9 ft. lbs.	-
Camshaft position (CMP) sensor to cylinder head bolt	9 Nm	-	80 in. lbs.
Cylinder head coolant pipe plug	35 Nm	26 ft. lbs.	-	Replace fastener with new one.
Cylinder head oil restrictor M8 plug	18 Nm	13 ft. lbs.	-
Cylinder head cover M6 bolts	12 Nm	9 ft. lbs.	-
Catalytic converter to cylinder head M8 bolts	23 Nm	17 ft. lbs.	-
Fuel rail to lower intake manifold M6 bolts	7 Nm	-	62 in. lbs.
Heater hoses to cylinder head cover bracket	8 Nm	-	71 in. lbs.
Intake manifold (upper) M6 bolts	10 Nm	-	89 in. lbs.
Intake manifold (lower) M6 bolts	9 Nm	-	80 in. lbs.
Intake manifold support bracket lower M8 bolt	25 Nm	18 ft. lbs.	-
Intake manifold support bracket upper nuts	10 Nm	7 ft. lbs.	-
Oil control valve/cam phaser bolt - exhaust	150 Nm	118 ft. lbs.	-
Oil control valve/cam phaser bolt - intake	30 Nm + 45° Turn	22 ft. lbs. + 45° Turn	-
Oil temperature sensor to cylinder head	11 Nm	8 ft. lbs.	-	Replace fastener with new one.
Spark plug to cylinder head	18 Nm	13 ft. lbs.	-
Throttle body support bracket bolt	10 Nm	7 ft. lbs.	-
Throttle body support bracket bolt to front cover	10 Nm	7 ft. lbs.	-
Variable valve timing solenoid to cylinder head cover bolt	4 Nm	-	35 in. lbs.
Variable valve lift solenoid bolt	10 Nm	7 ft. lbs.	-
Wire harness retainer bracket to LH cylinder head bolts	10 Nm	7 ft. lbs.	-

Front Engine

Part	Nm	ft. lbs.
Coolant crossover housing to engine timing cover M6 bolts	12 Nm	9 ft. lbs.
Engine timing cover M6 bolts	12 Nm	9 ft. lbs.
Engine timing cover M8 bolt	25 Nm	18 ft. lbs.
Engine timing cover M10 bolts	55 Nm	41 ft. lbs.
Thermostat housing to coolant crossover M6 bolts	12 Nm	9 ft. lbs.
Vibration damper M16 bolt	40 Nm + 105° Turn	30 ft. lbs. + 105° Turn
Water pump to engine timing cover M6 bolts	12 Nm	9 ft. lbs.
Water pump to engine timing cover M8 bolt	25 Nm	18 ft. lbs.
Water pump to engine timing cover M10 bolt	55 Nm	41 ft. lbs.

Rear Engine

Part	Nm	ft. lbs.	Notes
Flexplate to crankshaft bolts	94 Nm	69 ft. lbs.	Replace fastener with new one.
Rear crankshaft oil seal retainer bolts	12 Nm	9 ft. lbs.
Torque converter to flexplate bolts	42 Nm	31 ft. lbs.	Replace fastener with new one.
Trans to engine block bolts	50 Nm	37 ft. lbs.
Trans to upper oil pan bolts	50 Nm	37 ft. lbs.

Engine Mounting

Part	Nm	ft. lbs.	in. lbs.
Left engine mount isolator to engine block bolts	55 Nm	41 ft. lbs.	-
Left engine mount isolator to frame nuts	115 Nm	85 ft. lbs.	-
Left engine mount heat shield nuts	8 Nm	-	71 in. lbs.
Rear mount isolator to transmission bolts	54 Nm	40 ft. lbs.	-
Rear mount isolator to transmission crossmember nuts	175 Nm	129 ft. lbs.	-
Right engine mount isolator to engine block bolts	55 Nm	41 ft. lbs.	-
Right engine mount isolator to frame nut	115 Nm	85 ft. lbs.	-
Transmission crossmember to left side frame nuts	120 Nm	89 ft. lbs.	-
Transmission crossmember to right side frame bolts	72 Nm	53 ft. lbs.	-
Transmission pan crossmember to frame bolts	75 Nm	55 ft. lbs.	-
Transmission pan crossmember to transmission crossmember bolt	75 Nm	55 ft. lbs.	-

Miscellaneous Components

Part	Nm	ft. lbs.	in. lbs.
Air inlet hose band clamps	5 Nm	-	44 in. lbs.
Air cleaner housing to side rail	7 Nm	-	62 in. lbs.
Air cleaner lid bolts	4 Nm	-	35 in. lbs.
Air cleaner resonator to shroud bolts	5 Nm	-	44 in. lbs.
Engine lift bracket	21 Nm	15 ft. lbs.	-

Axle Lock

Head Honcho

April 30th at 6:10pm

Thread Creator
New
#27
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Evap Canister

Part	Nm	ft. lbs.
Vapor canister to vehicle bolts	6 Nm	4 ft. lbs.

Axle Lock

Head Honcho

April 30th at 6:14pm

Thread Creator
New
#28
Jump to PostCopy this target URL for a direct link to this post or click here to go there.

Exhaust

Part	Nm	ft. lbs.	in. lbs.
Catalytic converter to cylinder head bolts	24 Nm	18 ft. lbs.	-
Exhaust Y-Pipe to catalytic converter flange bolts	18 Nm	13 ft. lbs.	-
Front exhaust isolator bolts	30 Nm	22 ft. lbs.	-
Exhaust resonator clamp bolt	30 Nm	22 ft. lbs.	-
Heat shield nuts	3 Nm	-	27 in. lbs.
Muffler clamp nut	55 Nm	41 ft. lbs.	-
Muffler exhaust isolator bolts	25 Nm	18 ft. lbs.	-

Jeep Wrangler JL Torque Specs

ABS

Axle M186 Front

Axle M210 Front

Axle M200 Rear

Axle M220 Rear

Body

Brakes

Bumpers and Frame

Clutch

Cooling System

EGR (Exhaust Gas Recirculation)

Engine

Evap Canister

Exhaust

Similar Threads

Sign In

Create Account

Reset Password