| Part | Nm | ft. lbs. | in. lbs. |
| Fuel rail to intake manifold bolts | 7 Nm | - | 62 in. lbs. |
| Fuel tank skid plate bolts | 95 Nm | 70 ft. lbs. | - |
| Fuel fill tube clamp | 4 Nm | - | 35 in. lbs. |
| Fuel pump control module to rear crossmember bolts | 6 Nm | - | 53 in. lbs. |
| Fuel tank filler tube mounting bracket bolts | 6 Nm | - | 53 in. lbs. |
| Part | Nm | ft. lbs. | in. lbs. |
| Accelerator pedal bolts | 12 Nm | 9 ft. lbs. | - |
| Crankshaft position sensor bolt | 12 Nm | 9 ft. lbs. | - |
| Fuel rail bolts | 7 Nm | - | 62 in. lbs. |
| Oxygen sensor (downstream) | 43 Nm | 32 ft. lbs. | - |
| Oxygen sensor (upstream) | 43 Nm | 32 ft. lbs. | - |
| Throttle body bolts | 9 Nm | - | 80 in. lbs. |
| Part | Nm | ft. lbs. | in. lbs. |
| A/C Compressor oil drain bolt | 10 Nm | 7 ft. lbs. | - |
| A/C Compressor shaft bolt | 14 Nm | 10 ft. lbs. | - |
| A/C Condenser to radiator bolts | 5 Nm | - | 45 in. lbs. |
| Expansion valve bolts | 11 Nm | 8 ft. lbs. | - |
| Receiver/drier to condenser bolt | 22 Nm | 16 ft. lbs. | - |
| Refrigerant lines to A/C compressor | 20 Nm | 15 ft. lbs. | - |
| Refrigerant lines to A/C condenser | 20 Nm | 15 ft. lbs. | - |
| Refrigerant lines to A/C expansion valve nut | 20 Nm | 15 ft. lbs. | - |
| Suction and liquid line assembly to body bolts | 9 Nm | - | 80 in. lbs. |
| Part | Nm | ft. lbs. | Notes |
| Front driveshaft to front axle flange bolts | 121 Nm | 89 ft. lbs. | Replace fastener with new one. Torque and secure in a crisscross pattern. |
| Front driveshaft to transfer case flange bolts | 39 Nm | 29 ft. lbs. | Replace fastener with new one. Torque and secure in a crisscross pattern. |
| Rear driveshaft to transfer case flange bolts | 39 Nm | 29 ft. lbs. | Replace fastener with new one. Torque and secure in a crisscross pattern. |
| Rear driveshaft to rear axle flange bolts | 39 Nm | 29 ft. lbs. | Replace fastener with new one. Torque and secure in a crisscross pattern. |
| Part | Nm | ft. lbs. | in. lbs. |
| B-pillar impact sensor nut | 9 Nm | - | 80 in. lbs. |
| Clockspring mounting screw | 6 Nm | - | 53 in. lbs. |
| Driver airbag to steering wheel bolts | 9 Nm | - | 80 in. lbs. |
| Front turning loop height adjuster mounting bolts | 45 Nm | 33 ft. lbs. | - |
| Front impact sensor nut | 11 Nm | 8 ft. lbs. | - |
| Front seat belt buckle bolt | 40 Nm | 30 ft. lbs. | - |
| Front retractor pretentioner bolt | 45 Nm | 33 ft. lbs. | - |
| Front retractor pretentioner bracket to B-pillar bolts | 26 Nm | 19 ft. lbs. | - |
| Front retractor to B-Pillar bolt | 45 Nm | 33 ft. lbs. | - |
| Front seat belt turning loop mounting nut | 39 Nm | 29 ft. lbs. | - |
| Occupant restraint controller mounting nut | 11 Nm | 8 ft. lbs. | - |
| Passenger airbag mounting bolts | 18 Nm | 13 ft. lbs. | - |
| Seat airbag mounting nut | 10 Nm | 7 ft. lbs. | - |
| Rear center retractor to seat frame bolt | 70 Nm | 52 ft. lbs. | - |
| Rear center retractor to floor bolt | 70 Nm | 52 ft. lbs. | - |
| Rear retractor to C-pillar bolt | 32 Nm | 24 ft. lbs. | - |
| Rear retractor belt to floor nut | 48 Nm | 35 ft. lbs. | - |
| Rear seat belt buckle to floor bolt | 70 Nm | 52 ft. lbs. | - |
| Rear seat belt buckle to seat frame nut | 40 Nm | 30 ft. lbs. | - |
| Rear turning loop to sport bar | 32 Nm | 24 ft. lbs. | - |
Steering Column
| Part | Nm | ft. lbs. | Notes |
| Steering wheel nut | 50 Nm | 37 ft. lbs. | |
| Steering column nuts | 27 Nm | 20 ft. lbs. | |
| Intermediate shaft coupler pinch bolts | 54 Nm | 40 ft. lbs. | Replace fastener with new one. |
Steering Gear
| Part | Nm | ft. lbs. |
| Adjuster screw lock nut | 45 Nm | 33 ft. lbs. |
| Power steering gear bolts | 133 Nm | 99 ft. lbs. |
| Power steering gear pitman shaft nut | 250 Nm | 184 ft. lbs. |
| Power steering gear pressure line | 28 Nm | 21 ft. lbs. |
| Power steering gear return line | 28 Nm | 21 ft. lbs. |
Steering Linkage
| Part | Nm | ft. lbs. |
| Drag link inner nut (at pitman arm) | 105 Nm | 77 ft. lbs. |
| Drag link outer nut (at steering knuckle) | 64 Nm | 47 ft. lbs. |
| Drag link adjuster clamp | 46 Nm | 34 ft. lbs. |
| Tie rod end nut (at steering knuckle) | 64 Nm | 47 ft. lbs. |
| Tie rod end adjuster clamp | 46 Nm | 34 ft. lbs. |
| Steering damper bolt (at axle) | 80 Nm | 59 ft. lbs. |
| Steering damper nut (at tie rod) | 80 Nm | 59 ft. lbs. |
| Steering damper bracket nut | 75 Nm | 55 ft. lbs. |
Steering Pump
| Part | Nm | ft. lbs. | in. lbs. |
| Power steering pump bracket to frame | 28 Nm | 21 ft. lbs. | - |
| Power steering pump to bracket | 8 Nm | 6 ft. lbs. | 71 in. lbs. |
| Pressure line to pump | 20 Nm | 15 ft. lbs. | - |
| Power steering hose routing bracket bolt | 6 Nm | 5 ft. lbs. | 53 in. lbs. |
| Power steering fluid reservoir bolt | 6 Nm | 5 ft. lbs. | 53 in. lbs. |
Front Suspension
| Part | Nm | ft. lbs. |
| Hub and bearing bolts | 102 Nm | 75 ft. lbs. |
| Hub and bearing nut | 136 Nm | 100 ft. lbs. |
| Lower control arm rear nut | 140 Nm + 145° Turn | 103 ft. lbs. + 145° Turn |
| Lower control arm front nut | 140 Nm + 145° Turn | 103 ft. lbs. + 145° Turn |
| Lower ball joint nut (initial torque) | 20 Nm | 15 ft. lbs. |
| Lower ball joint nut (final torque) | 45 Nm | 33 ft. lbs. |
| Shock absorber lower bolt | 100 Nm | 74 ft. lbs. |
| Shock absorber upper bolt | 110 Nm | 81 ft. lbs. |
| Stabilizer bar bolts | 63 Nm | 46 ft. lbs. |
| Stabilizer bar link upper nut | 93 Nm | 69 ft. lbs. |
| Stabilizer bar link lower bolt | 80 Nm | 59 ft. lbs. |
| Track bar frame nut | 70 Nm + 115° Turn | 52 ft. lbs. + 115° Turn |
| Track bar axle bolt | 70 Nm + 115° Turn | 52 ft. lbs. + 115° Turn |
| Upper control arm front nut | 55 Nm + 185° Turn | 41 ft. lbs. + 185° Turn |
| Upper control arm rear bolt | 50 Nm + 135° Turn | 37 ft. lbs. + 135° Turn |
| Upper ball joint nut | 75 Nm | 55 ft. lbs. |
Rear Suspension
| Part | Nm | ft. lbs. |
| Lower control arm front bolts | 100 Nm + 50° Turn | 74 ft. lbs. + 50° Turn |
| Lower control arm rear nut | 100 Nm + 50° Turn | 74 ft. lbs. + 50° Turn |
| Shock absorber upper bolt | 110 Nm | 81 ft. lbs. |
| Shock absorber lower nut | 100 Nm | 74 ft. lbs. |
| Stabilizer bar bolts | 63 Nm | 46 ft. lbs. |
| Stabilier bar link upper nut | 90 Nm | 66 ft. lbs. |
| Stabilizer bar link lower nut | 80 Nm | 59 ft. lbs. |
| Track bar nut (frame end) | 100 Nm + 30° Turn | 74 ft. lbs. + 30° Turn |
| Track bar bolt (axle end) | 100 Nm + 60° Turn | 74 ft. lbs. + 60° Turn |
| Upper control arm front bolt | 100 Nm + 80° Turn | 74 ft. lbs. + 80° Turn |
| Upper control arm rear nut | 100 Nm + 65° Turn | 74 ft. lbs. + 65° Turn |
| Part | Nm | ft. lbs. |
| Poppet plug | 20 Nm | 15 ft. lbs. |
| Drain/fill plug | 28 Nm | 21 ft. lbs. |
| Case half bolts | 26 Nm | 19 ft. lbs. |
| Output flange nut | 225 Nm | 166 ft. lbs. |
| Transfer case to transmission bolts | 60 Nm | 44 ft. lbs. |
| Shift motor (actuator) bolts | 12 Nm | 9 ft. lbs. |
| Range position switch | 27 Nm | 20 ft. lbs. |
| Extension housing bolts | 26 Nm | 19 ft. lbs. |
| Range lever bolt | 30 Nm | 22 ft. lbs. |
Automatic Transmission
| Part | Nm | ft. lbs. | in. lbs. | Notes |
| Engine to bell-housing bolt | 60 Nm | 44 ft. lbs. | - | |
| Extension housing to transmission bolt | 27 Nm | 20 ft. lbs. | - | |
| Manual park release lever shaft nut | 10 Nm | - | 89 in. lbs. | |
| Manual park release cable to transmission | 20 Nm | 15 ft. lbs. | - | |
| Manual park release grommet to bracket | 9 Nm | - | 79 in. lbs. | |
| Manual park release lever to transmission shaft | 20 Nm | 15 ft. lbs. | - | |
| Manual park release shield to transmission | 17 Nm | 12 ft. lbs. | - | |
| Output shaft flange nut | 60 Nm | 44 ft. lbs. | - | |
| Output speed sensor bolt | 8 Nm | - | 71 in. lbs. | |
| Park pawl lock rod guide plate bolt | 10 Nm | - | 89 in. lbs. | |
| Park pawl shaft plug | 35 Nm | 26 ft. lbs. | - | |
| Shifter assembly bolts | 9 Nm | - | 79 in. lbs. | |
| Transmission oil pan bolt | 10 Nm | - | 89 in. lbs. | |
| Transmission oil pan drain plug | 9 Nm | - | 80 in. lbs. | |
| Transmission oil fill plug | 35 Nm | 26 ft. lbs. | - | |
| Transmission oil pump housing to cover bolt | 5 Nm + 45° Turn | - | 44 in. lbs. + 45° Turn | |
| Torque converter to flex plate bolt | 55 Nm | 41 ft. lbs. | - | Replace fastener with new one. NOTE: If old fastener must be reused, Loc-Tite must be applied to the threads. |
| Transmission mount to adapter | 30 Nm | 22 ft. lbs. | - | |
| Shift lever assembly to floor pan bolts | 8 Nm | - | 70 in. lbs. | |
| Transmission shift knob | 2 Nm | - | 17 in. lbs. | |
| Transfer case shift knob | 2 Nm | - | 17 in. lbs. | |
| Manual park release to shift lever assembly | 8 Nm | - | 70 in. lbs. |
Manual Transmission
| Part | Nm | ft. lbs. | in. lbs. |
| Drain plug | 30 Nm | 22 ft. lbs. | - |
| Fill plug | 30 Nm | 22 ft. lbs. | - |
| Shifter base to floor assembly bolts | 8 Nm | - | 70 in. lbs. |
| Control shaft cover assembly bolts | 25 Nm | 18 ft. lbs. | - |
| Shift lever bolt | 8 Nm | - | 70 in. lbs. |
| Output speed sensor bolt | 8 Nm | - | 70 in. lbs. |
| Transmission stroke sensor bolts | 25 Nm | 18 ft. lbs. | - |
| Input shaft retainer bolts | 9 Nm | - | 80 in. lbs. |
| Clutch release bearing retainer bolts | 10 Nm | - | 88 in. lbs. |
| Output shaft lock nut | - | - | - |
| Shift fork detent bolts | 25 Nm | 18 ft. lbs. | - |
| Shift fork support bolts | 8 Nm | - | 71 in. lbs. |
| Reverse idler gear shaft bolts | 20 Nm | 15 ft. lbs. | - |
| Countershaft bolt | 100 Nm | 74 ft. lbs. | - |
| Transmission case bolts | 40 Nm | 30 ft. lbs. | - |
| Transmission oil separator bolts | - | - | - |
| Transmission shift guide plate bolts | - | - | - |
| Transmission mount bolts | 47 Nm | 35 ft. lbs. | - |
| Shift cable retaining bracket | 22 Nm | 16 ft. lbs. | - |
| Trim | Torque | Lug Bolt Size | Socket Size | Hub Size |
| Sport | 130 ft. lbs. [176 Nm] | M14 x 1.50 | 22 mm | 71.5 mm |
| Sahara | 130 ft. lbs. [176 Nm] | M14 x 1.50 | 22 mm | 71.5 mm |
| Rubicon | 130 ft. lbs. [176 Nm] | M14 x 1.50 | 22 mm | 71.5 mm |
All wheels should be torqued in a star pattern while on the ground.
Scroll with the mousewheel
Swipe left or right
Scroll with left/right keys
